4 Load Paper
PictureMate comes with genuine Epson
®
glossy photo paper
made especially for printing lab quality photos.
Caution: Don’t load or print on plain paper; this may damage
PictureMate.
1 Move the handle to the back
and open the paper support,
if necessary.
2 Press the Open
button to open the
output tray.
3 Slide the edge guides outward.
4 Load up to 20 sheets at a time. Fan the sheets to
slightly separate them.
5 Place your paper into the slot between the edge
guides with the glossy side up. Slide the edge guides
inward slightly.
6 Raise the photo viewer screen.
Note: Keep unused paper in the original package and store it flat to
prevent curling.
Load glossy side up
Make sure paper
is beneath arrow
on edge guide
To Next Page
Loading...
