Epson PowerLite 1220 - Connecting an S-Video Source

36 Setting Up the Projector
Connecting an S-Video Source
1. Connect the S-Video cable to the S-Video connector on your
device and the
S-Video port on the projector.
2. If you want to play sound through the projector, see page 40 for
instructions on connecting an audio cable.
When you’ve finished making connections, see page 43 for
instructions on turning on the projector and Chapter 2 for
instructions on displaying and adjusting the image.
note
If the S-Video cable was not
p
rovided with your video
device, you can purchase one
f
rom Epson; see page 17.
PowerLite S9
S-Video port
PowerLite 1220/PowerLite 1260
S-Video port