Solving Problems 97
If you’re using Mac OS X:
1. Open
System Preferences.
2. Click
Displays.
3. Click
Detect Displays.
4. Make sure the
VGA Display or Color LCD dialog box is selected.
5. Click the
Arrangement or Arrange tab.
6. Make sure the
Mirror Displays checkbox is selected.
The message Not Supported is displayed.
■ Make sure the correct input signal is selected in the Signal menu
(see page 69).
■ Make sure your computer’s resolution and frequency or refresh
rate is supported by the projector (see page 108). If necessary,
change your computer’s settings.
Only part of the computer image is displayed.
■ Press the Auto button on the remote control or the Enter button
on the projector.
■ Make sure the image Position setting is correct in the Signal
menu. See page 70 for more information.
■ Press the Aspect button on the remote control or select the
correct
Aspect setting from the Signal menu. See page 53 for
details on the available options.
■ Press the Esc button on the remote control to cancel the E-Zoom
function.
■ Make sure your computer’s resolution setting is correct. See the
compatible video formats listed on page 108.
■ You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
To Next Page
Loading...
Need help?
General