Related topics
Projecting a Slide Show
Selecting the Connected USB Source
You can switch the projector's display to the source you connected to a USB TypeA port.
1. Make sure the connected USB source is turned on, if necessary.
2. Press the USB button on the remote control.
3. Press the button again to cycle through other USB sources, if available.
Parent topic: Connecting to External USB Devices
Disconnecting a USB Device or Camera From the Projector
When you finish presenting with a connected USB device or camera, you must prepare to disconnect the
device from the projector.
1. If the device has a power button, turn off and unplug the device.
2. Disconnect the USB device or camera from the projector.
Parent topic: Connecting to External USB Devices
Connecting to a Document Camera
You can connect a compatible Epson document camera to your projector's USB TypeA port to project
images viewed by the camera.
Note: You may be able to connect different Epson document camera models to your projector's
Computer port. See the document camera's manual for instructions.
1. Locate the USB cable that came with the document camera.
2. Connect the USB cable to the projector's USB TypeA port.
34
To Next Page
Loading...
