EasyManuals Logo

Epson PowerLite 1221 User Manual

Epson PowerLite 1221
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #96 background imageLoading...
Page #96 background image
Reset the lamp timer to zero to keep track of the new lamp’s usage.
Parent topic: Projector Lamp Maintenance
Related tasks
Resetting the Lamp Timer
Resetting the Lamp Timer
You must reset the lamp timer after replacing the projector's lamp to clear the lamp replacement
message and to keep track of lamp usage correctly.
Note: Do not reset the lamp timer if you have not replaced the lamp to avoid inaccurate lamp usage
information.
1. Turn on the projector.
2. Press the Menu button.
3. Select the Reset menu and press Enter.
4. Select Reset Lamp Hours and press Enter.
You see a prompt asking if you want to reset the lamp hours.
5. Select Yes and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic: Projector Lamp Maintenance
96

Table of Contents

Other manuals for Epson PowerLite 1221

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite 1221 and is the answer not in the manual?

Epson PowerLite 1221 Specifications

General IconGeneral
Number of colors16.78 million colors
Projection distance0.9 - 10.8 m
Projection technologyLCD
Contrast ratio (typical)3000:1
Screen size compatibility30 - 300 \
Projector native resolutionXGA (1024x768)
Keystone correction, horizontal±30 °
Aspect ratio4:3
RS-232 ports-
Dimensions (WxDxH)294.6 x 228.6 x 78.7 mm
Horizontal resolution560 lines
Connectivity technologyWired
Lamp typeUHE
Lamp power200 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source4000 h
Service life of light source (economic mode)5000 h
DVI portNo
USB connector typeUSB Type-A, USB Type-B
USB 2.0 ports quantity2
S-Video inputs quantity1
Ethernet LAN (RJ-45) ports0
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL 60, PAL M, PAL N, SECAM
Supported graphics resolutions1440 x 1050, 1024 x 768 (XGA), 1152 x 864 (XGA+), 1280 x 800 (WXGA), 1440 x 900 (WXGA+), 1600 x 1200 (UXGA), 640 x 480 (VGA)
RMS rated power2 W
Product colorBlack
Cable lock slot typeKensington
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.4 W
Power consumption (typical)238 W
Noise level37 dB
Noise level (economic mode)29 dB
Operating temperature (T-T)5 - 35 °C
Cables includedUSB, VGA
Weight and Dimensions IconWeight and Dimensions
Depth228.6 mm
Width294.6 mm
Height78.7 mm
Weight2300 g

Related product manuals