EasyManuals Logo

Epson PowerLite 1940W User Manual

Epson PowerLite 1940W
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #62 background imageLoading...
Page #62 background image
Parent topic: Registering Digital Certificates from a USB Device
Registering Digital Certificates from a Web Browser
You can register the digital certificates on the projector for wireless LAN authentication.
1. Make sure your digital certificate file is compatible with projector registration.
2. Make sure the projector is turned on.
3. Start your web browser on a computer connected to the network.
4. Type the projector's IP address into the browser's address box and press the computer's Enter key.
You see the Web Control screen and a prompt to enter a user ID and password.
5. Enter the following information:
For the user ID, enter EPSONWEB. (You cannot change the user ID.)
For the password, enter the default password admin. (You can change the Web Control password
using the projector's Network menu.)
6. Select the Administrator Settings option and select Manage Certificates.
You see a screen like this:
62
Downloaded From projector-manual.com

Table of Contents

Other manuals for Epson PowerLite 1940W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite 1940W and is the answer not in the manual?

Epson PowerLite 1940W Specifications

General IconGeneral
Number of colors16.78 million colors
Native aspect ratio16:10
Projection distance- m
Projection technology3LCD
Contrast ratio (dynamic)3000:1
Contrast ratio (typical)-
Screen size compatibility29 - 280 \
Projector native resolutionWXGA (1280x800)
Keystone correction, horizontal-30 - 30 °
FocusManual
Zoom capabilityYes
Focal length range18.2 - 29.2 mm
Aperture range (F-F)1.51 - 1.99
Lamp typeUHE
Lamp power245 W
Light source typeLamp
Service life of light source2500 h
Service life of light source (economic mode)4000 h
Full HDNo
Supported video modes1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format systemNTSC, PAL, SECAM
RMS rated power10 W
Number of built-in speakers1
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Ethernet LAN data rates10, 100 Mbit/s
Noise level37 dB
Noise level (economic mode)29 dB
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)3.8 W
Power consumption (typical)311 W
Storage temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Weight3900 g

Related product manuals