EasyManuals Logo

Epson PowerLite 1940W User Manual

Epson PowerLite 1940W
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
5. Enter the IP address for the SMTP Server option.
Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a
number from 0 to 255).
6. Select a number for the SMTP server Port Number, from 1 to 65535 (default is 25).
7. Choose an Address or Email Address field, enter the e-mail address, and select the alerts you
want to receive there. Repeat for up to three addresses.
Note: Your e-mail address can be up to 32 alphanumeric characters long.
8. When you finish selecting settings, select Complete or Setup Complete and follow the on-screen
instructions to save your settings and exit the menus.
Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.
Network Projector E-mail Alert Messages
Parent topic: Using the Projector on a Network
Network Projector E-mail Alert Messages
When a problem occurs with a networked projector, and you selected to receive e-mail alerts, you
receive an e-mail containing the following information:
EPSON Projector on the subject line
The name of the projector experiencing a problem
The IP address of the affected projector
Detailed information about the problem
Note: If a critical problem causes a projector to shut down, you may not receive an e-mail alert.
Parent topic: Setting Up Projector Network E-Mail Alerts
Setting Up Monitoring Using SNMP
Network administrators can install SNMP (Simple Network Management Protocol) software on network
computers so they can monitor projectors. If your network uses this software, you can set up the
projector for SNMP monitoring.
66
Downloaded From projector-manual.com

Table of Contents

Other manuals for Epson PowerLite 1940W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite 1940W and is the answer not in the manual?

Epson PowerLite 1940W Specifications

General IconGeneral
Number of colors16.78 million colors
Native aspect ratio16:10
Projection distance- m
Projection technology3LCD
Contrast ratio (dynamic)3000:1
Contrast ratio (typical)-
Screen size compatibility29 - 280 \
Projector native resolutionWXGA (1280x800)
Keystone correction, horizontal-30 - 30 °
FocusManual
Zoom capabilityYes
Focal length range18.2 - 29.2 mm
Aperture range (F-F)1.51 - 1.99
Lamp typeUHE
Lamp power245 W
Light source typeLamp
Service life of light source2500 h
Service life of light source (economic mode)4000 h
Full HDNo
Supported video modes1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format systemNTSC, PAL, SECAM
RMS rated power10 W
Number of built-in speakers1
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Ethernet LAN data rates10, 100 Mbit/s
Noise level37 dB
Noise level (economic mode)29 dB
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)3.8 W
Power consumption (typical)311 W
Storage temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Weight3900 g

Related product manuals