EasyManuals Logo

Epson PowerLite 1940W User Manual

Epson PowerLite 1940W
229 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #73 background imageLoading...
Page #73 background image
3. Select the input source that you want to control in the Sources List box. You can scroll through
available sources using the up and down arrows in the box.
4. To control projection remotely, click the on-screen buttons that correspond to the projector's remote
control buttons. You can scroll through button options at the bottom of the screen.
Note: These on-screen buttons do not directly correspond to the projector's remote control buttons:
OK acts as the Enter button
Menu displays the Configuration menu
5. To view information about the projector, click the Info tab.
6. To change projector, Crestron, and password settings, click the Tools tab, select settings on the
displayed screen, and click Send.
7. When you finish selecting settings, click Exit to exit the program.
Parent topic: Crestron RoomView Support
73
Downloaded From projector-manual.com

Table of Contents

Other manuals for Epson PowerLite 1940W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson PowerLite 1940W and is the answer not in the manual?

Epson PowerLite 1940W Specifications

General IconGeneral
Number of colors16.78 million colors
Native aspect ratio16:10
Projection distance- m
Projection technology3LCD
Contrast ratio (dynamic)3000:1
Contrast ratio (typical)-
Screen size compatibility29 - 280 \
Projector native resolutionWXGA (1280x800)
Keystone correction, horizontal-30 - 30 °
FocusManual
Zoom capabilityYes
Focal length range18.2 - 29.2 mm
Aperture range (F-F)1.51 - 1.99
Lamp typeUHE
Lamp power245 W
Light source typeLamp
Service life of light source2500 h
Service life of light source (economic mode)4000 h
Full HDNo
Supported video modes1080i, 1080p, 480i, 480p, 576i, 576p, 720p
Analog signal format systemNTSC, PAL, SECAM
RMS rated power10 W
Number of built-in speakers1
USB connector typeUSB Type-A, USB Type-B
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
Ethernet LAN data rates10, 100 Mbit/s
Noise level37 dB
Noise level (economic mode)29 dB
PlacementDesktop, Ceiling
Product typeStandard throw projector
Product colorWhite
Cable lock slot typeKensington
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)3.8 W
Power consumption (typical)311 W
Storage temperature (T-T)5 - 35 °C
Weight and Dimensions IconWeight and Dimensions
Weight3900 g

Related product manuals