INSTALLATION
HANDBOOK
Remote Control Information
Epson PowerLite 410W
1
Using the Remote Control
T he remote control lets you access your projector’s features from
anywhere in the room—up to 20 feet (6 m) away. For example, you
can turn the projector on and o, freeze the presentation, zoom in on
a portion of your image, and access the menu system. (The projector
menus let you adjust many projector settings; see Chapter 4.)
When using the remote control, stand within 20 feet (6 m) of the
projector. Point the remote control either at the front or back of the
projector or at the screen (the projector’s front sensor c
an detect
signals bounced o the screen). Press the button for the function you
want to use.
This chapter covers the following information:
Controlling the picture and sound
Replacing the remote control batteries
Controlling the Picture and Sound
You can use the remote control to select your source, adjust the colors,
temporarily turn o the picture and sound, freeze the action, or zoom
in on the picture. Make sure you have set up your projector and
connected any equipment as described in Chapter 1.
Switching Between Picture Sources
If you’ve connected your projector to more than one computer and/or
video source, you can use the
Source Search button on the projector
or remote control to switch between the dierent sources.
After you select a source, the screen goe
s dark for a moment before the
image appears. The name of the selected source (such as
Computer1
or
S-Video) appears briey on the screen.
Source Search
button
To Next Page
Need help?
General