Two Connection Modes
9
Two Connection Modes
In EasyMP Network Projection, you can connect a computer and the
projector via a network by using the Advanced Connection Mode or
Quick Connection Mode.
q
Depending on the projector model, either a wired or a wireless LAN
connection may not be available. See your projector’s User’s Guide for
details.
Quick Connection Mode
Quick Connection Mode is only available when you install the wireless
LAN module in the projector.
In Quick Connection Mode, you can connect the projector and a
computer directly using a wireless communication. You can easily
project images on the computer without making complex network
settings because a wireless LAN access point is not required.
Advanced Connection Mode
Advanced Connection Mode is an infrastructure connection, and
connects to an existing network system.
In Advanced Connection Mode, you can connect the projector and the
computer via a LAN access point.
When connecting the projector via wired LAN, connect the projector to
the network hub with a commercially available LAN cable.
To Next Page
Loading...
Need help?
General