7. Select the Start Adjustments setting and press Enter.
8. Press the arrow buttons to select the area of the screen that you want to adjust and press Enter.
9. Select the color (Red, Green, or Blue) you want to adjust, and use the left arrow button to weaken
the color tone and the right arrow button to strengthen the color tone.
10. Press Esc.
11. Repeat steps 8 and 9 for each area you want to adjust.
12. When you are finished, press the Menu button.
Parent topic: Using Multiple Projectors
Adjusting the Color Convergence (Panel Alignment)
You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the
red, green and blue colors) in the projected image.
Note: Allow your projector to warm up for at least 10 to 15 minutes and make sure the image is in focus
before you use the Panel Alignment feature. The projected image size should be at least 60 inches (152
121
To Next Page
Loading...
Need help?
General