98 Monitoring the Projector Over a Network
Type status icons
No warnings or problems.
Warning or problem.
Monitor Password error. No monitor password was
entered when you registered the projector, or an
incorrect password was entered.
Monitoring disabled. Right-click the icon and select
Monitoring Enabled to monitor the projector.
Data is currently being updated.
Network error (projector is not connected to the
network, the power cable is disconnected, or
Network Off is selected as the Standby Mode
setting in the Extended menu; see page 58).
Network error (Esc/VP.net communication error).
Power status icons
The projector is powered on; normal status.
The projector is powered off; normal status.
The projector is powered on; abnormal status.
The projector is powered off; abnormal status.
Temperature level status icons
The projector’s internal temperature is normal (low).
The projector’s internal temperature is normal
(medium).
The projector’s internal temperature is normal (high).
The projector’s internal temperature is high
(high-temperature warning).
The projector’s internal temperature is too high
(high-temperature error). The projector is turned off
automatically.
To Next Page
Loading...
Need help?
General