Monitoring the Projector Over a Network 99
Error status icons
Lamp life warning. The lamp is nearing the end of its
life.
High-temperature warning. The projector is getting
too hot but continues to operate.
Replace air filter.
No air filter. The air filter is not installed or installed
incorrectly.
Low air flow. The air filter needs to be cleaned or
replaced.
Air flow sensor error. Contact Epson as described on
page 89.
Lamp cover door open. Close the lamp cover door.
Lamp out. The lamp has reached the end of its life.
Lamp failure at power on. The lamp has reached its
end of life or is installed incorrectly.
High internal temperature error. The projector is
turned off automatically.
Internal (system) error. Contact Epson as described
on page 89.
Fan error. Contact Epson as described on .
Sensor error. Contact Epson as described on
page 89.
Other error. Contact Epson as described on page 89.
To Next Page
Loading...
Need help?
General