109
3. Select the Installation menu and press Enter.
4. Select the Test Pattern setting and press Enter.
5. Select the pattern you want to display and press Enter.
A test pattern is displayed.
6. Adjust the image as necessary.
Note: Some settings may not be available while displaying a test pattern. To adjust these settings or
to fine-tune the image, project an image from a connected device.
7. Press Esc to clear the test pattern.
Parent topic: Using Basic Projector Features
Focusing the Image Using the Focus Ring
You can correct the focus using the focus ring.
1. Turn on the projector and display an image.
To Next Page
Loading...
