195
Saving a Scheduled Event
Viewing Scheduled Events
Editing a Scheduled Event
Parent topic: Adjusting Projector Features
Related tasks
Setting a Password
Selecting Password Security Types
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
Note: Light Source Calibration events do not start if the projector is not used continuously for at least 20
minutes, or if the projector is regularly turned off by shutting off the power outlet. Set Light Source
Calibration events to occur only after 100 hours of usage.
Note: The Schedule setting in the Menu Protection menu must be turned off to schedule an event.
1. Set the date and time in the Management menu.
2. Press the Menu button.
3. Select the Management menu and press Enter.
4. Select the Schedule Settings setting and press Enter.
5. Select the Schedule menu and press Enter.
To Next Page
Loading...
Need help?
General