85
4 Profile Searches for projectors on the network by using the projector
information saved previously.
5 Profile list Displays the registered profiles (projector information). When you
double-click the profile, the projectors registered in the profile are
searched for on the network.
6 Set options Displays the Set options screen.
7 Join Connects to the selected projectors.
8 List of Connected
Projectors (Advanced
Connection Mode only)
Displays information on the projectors selected from the Projector
List. Even if the search method is changed, the content of the List of
Connected Projectors remains the same.
9 Register (Advanced
Connection Mode only)
Registers the projectors from the List of Connected Projectors to a
profile.
10 Connect as a
Moderator, or disable
interrupt connections.
Connects to the selected projectors as the moderator and you can
prevent any other users from interrupting your connection (supported
models only).
The moderator function is available only on the Standard Edition of
the software.
11 Clear list Clears information displayed in the Projector List and the List of
Connected Projectors.
12 Projector List Displays a list of the projectors found on the network. You can then
select projectors to connect to. The search results for each search
method (Automatic search, Manual search, and Profile) are
displayed in separate lists.
To Next Page
Loading...
