86
• Status: See the description of projector status icons in the next
table.
• Projector name: Displays the projector's name.
• SSID (Quick Connection Mode only): Displays the projector's
SSID.
• Signal Intensity (Quick Connection Mode only): Displays the
signal intensity when a connection is made in Quick Connection
Mode. As the Signal intensity increases, so does the number of lit
indicators.
• IP address (Advanced Connection Mode only): Displays the
projector's IP address.
• Comments: Displays comments for the projector. You can edit the
comment by right-clicking the profile, and then clicking Property.
You can enter up to 32 characters.
13 Refresh Updates information in the Projector List.
14 Manual search box
(Advanced Connection
Mode only)
When using Manual search, enter the projector's IP address or the
projector name. Click the Search button to search for the specified
projector.
Projector status icons in the Projector List are described in the following table.
Standby
Available. You can connect to the projector.
Busy
Available. Although other computers are connected to the projector, you can
also connect at the same time.
Mirroring...
Available. You can connect to a group of projectors that are projecting the
same image (mirroring).
To Next Page
Loading...
