55
1 Auto search Displays a list of available projectors on the same network as the
search source device. Select of the target projector to select the
projector. You can remove the projector name from the list by
clearing the check box.
If you want to update the list, click the Search again button.
On the Export network projector screen, an icon indicating the
status of the projector is displayed next to the projector name.
: You can upload the project to the projector.
: You cannot upload the project to the projector.
2 History
Displays a list of connection history. Select of the target projector
to select the projector. You can remove the projector name from the
list by clearing the check box.
On the Export network projector screen, an icon indicating the
status of the projector is displayed next to the projector name.
: The status of the projector has not been checked.
: The projector was not detected.
: You can upload the project to the projector.
: You cannot upload the project to the projector.
3 IP search Allows you to enter an IP address for the target projector. Searching
projectors starts by clicking the Search button.
When the search result is displayed, you can use the Add button to
select the projector.
4 Enter projector name (Only displayed when selecting projectors to share the scheduled
events.)
Allows you to enter a projector name for the target projector.
You can use the Add button to select the projector.
Parent topic: Project Screen
To Next Page
Loading...
Need help?
General