Epson PowerLite Pro Z8050WNL User Manual

Using the Connection Screen
17
C
Status
The following six icons indicate the status of the detected projectors.
Standby Select for connecting.
Busy Select for connecting. When you click
Connect, the computer currently
connected is disconnected and your
computer is connected.
Busy (Disable
interrupt
connection)
Cannot be selected. Disable
interrupt connection is set on
another computer which is already
connected.
Currently in
use by
another
application
The projector's Configuration Menu is
open. You can select it after closing
the Configuration menu and running
the search again.
Searching Displayed while running Manual
search or Profile.
Not found. Displayed when a projector cannot be
found as a result of Manual search or
Profile. In Quick Connection Mode,
you can only select multiple
projectors with the same SSID.
D
Projector name
The projector's name is displayed.
E
Disable interrupt connection
Check the box to prevent an interrupt connection by other computers
while connected to the selected projector.
F
Use multi-display
Check the box to use the Multi-screen display function. When this is
selected, Display layout and Display properties are displayed at the
bottom of the screen. s p.25
G
Troubleshooting
If there is a problem and you cannot have a connection, press this
button to open the EasyMP Network Projection Troubleshooting
screen.
H
Connect
Connect to the projector you selected from the search results list.
When a connection is made with a projector, a toolbar is displayed.
I
Set options
You can make general setting options such as the processing method
when starting up EasyMP Network Projection. For details, see Set
options s p.42
J
Save in the profile
Saves the results of a search for projectors on the network as a Profile.
s p.37
K
Clear list
Deletes all search results.
L
IP address (Advanced Connection Mode only)
The projector's IP address is displayed.
M
Display
Select the number displayed (when Use multi-display is selected). s
p.32
N
Profile
You can search for a projector on the network using a Profile
saved using Save in the profile. s p.37
O
SSID (Quick Connection Mode only)
The projector's SSID is displayed.
P
Signal intensity (Quick Connection Mode only)
As the Signal intensity increases, so does the number of lit Indicators.
Q
Update list (Quick Connection Mode only)
Updates Status and Signal intensity.

Epson PowerLite Pro Z8050WNL Specifications

Display

native resolution	WXGA (1280 x 800)
aspect ratio	16:10
color reproduction	16.7 million colors

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz AC
power consumption (normal operation)	942 W
power consumption (ECO operation)	776 W

Brightness and Contrast

white light output	7000 lumens
color light output	7000 lumens
contrast ratio	5000:1

Operating Environment

operating temperature	32 ° to 113 °F (0 ° to 45 °C)
fan noise (normal mode)	38 dB
fan noise (ECO mode)	32 dB

Weight and Dimensions

weight	48.4 lb
dimensions with feet (W x D x H)	21.0" x 28.9" x 8.9"
dimensions without feet (W x D x H)	21.0" x 28.9" x 6.6"