Epson PowerLite Pro Z8050WNL User Manual

Using the Connection Screen
18
Using the Toolbar
The toolbar is displayed on the computer screen after EasyMP Network
Projection starts and a connection is made with the projector. You can
use this toolbar to operate and make settings for the projector.
Select target projector
Click to limit the projectors operated from the toolbar when
projecting from multiple projectors using the distribution
function or Multi-screen display. The indication below the
icon shows the projectors that can be controlled.
ALL indicates that all of the connected projectors can be
controlled.
For example, when "1, 3" is displayed, projectors No. 1 and
No. 3 can be controlled.
Click to display the following screen.
A
Select the projector to be controlled.
B
Indicates the No. of an allocated projector. This No.
indicates the No. of the projector that you can control
from the toolbar.
C
Indicates the status of the projector.
Stop
Stops projection while connected to the projector.

Epson PowerLite Pro Z8050WNL Specifications

Display

native resolution	WXGA (1280 x 800)
aspect ratio	16:10
color reproduction	16.7 million colors

Power

power supply voltage	100 – 240 V ±10%, 50/60 Hz AC
power consumption (normal operation)	942 W
power consumption (ECO operation)	776 W

Brightness and Contrast

white light output	7000 lumens
color light output	7000 lumens
contrast ratio	5000:1

Operating Environment

operating temperature	32 ° to 113 °F (0 ° to 45 °C)
fan noise (normal mode)	38 dB
fan noise (ECO mode)	32 dB

Weight and Dimensions

weight	48.4 lb
dimensions with feet (W x D x H)	21.0" x 28.9" x 8.9"
dimensions without feet (W x D x H)	21.0" x 28.9" x 6.6"