17
Adjusting the Volume
Adjusting the Volume
The volume of the projector's built-in speaker can be adjusted as follows.
When the button is pressed to the [ ] side, the volume increases, and when
it is pressed to the [ ] side, the volume decreases.
The volume gauge appears on the screen when the volume is being adjusted.
Selecting the Image Source
The image source is the projector port to which your video equipment is
connected. You can select the image source automatically, using Source
Search as described below. Or you can select a source yourself as described
on page 18
.
Automatically Detecting the Source (Source Search)
Source Search automatically detects the picture signal from connected
equipment and projects the image.
1 Turn on your computer or video equipment. If you are viewing a
tape or DVD, start playback.
2 Press the Source Search button.
p
• If the value displayed in the gauge on the screen stops changing when the
volume is being adjusted, it indicates that the limit for volume adjustment
has been reached.
• The volume can also be adjusted using the configuration menu. See page
34.
Remote control
Using the Remote Control Using the Control Panel
To Next Page
Loading...
