18
Selecting the Image Source
3 The projector searches for an active source and displays the
image.
Unused sources are skipped, as shown below. When two or more
pieces of equipment are connected, press the [Source Search] button
repeatedly to select the desired source.
Selecting the Source from the Remote Control
You can use the remote control to select a specific image source.
p
You see this screen if no picture signal is available. You can use the screen
to choose the input source.
Computer S-Video Video
Skip
Changes to the image
from the Computer port.
Changes to the image
from the S-Video port.
Changes to the image
from the Video port.
Remote Control
To Next Page
Loading...
