20
Functions for Enhancing Projection
Freezing the Image
The source image continues to project even when the screen is frozen. You
can still perform operations such as changing files, without projecting any
images.
You can turn this function on or off by pressing the [Freeze] button.
Changing the Aspect Ratio
This function changes the aspect ratio of images from 4:3 to 16:9 when
component video, S-video, or composite video images are being projected.
Images which have been recorded in digital video or onto DVDs can be
viewed in 16:9 wide-screen format.
The display is changed whenever you press the button.
p
• Sound does not stop.
• Even though the image on the screen is frozen, the image source
continues to project, and so it is not possible to resume projection from
the point where it was paused.
• Pressing the [Freeze] button also clears configuration menu displays
and help messages.
• The freeze function still works while the E-Zoom function is being used.
Remote control
p
You can also make this setting using the "Resize" command in the
"Signal" menu.
When images in Squeeze
Mode are projected at 16:9
When images in Squeeze
Mode are projected at 4:3
Remote control
To Next Page
Loading...
Need help?
General
Weight and Dimensions
