Epson Pro G7000W User Manual

141
4. Select Projector ID and press Enter.
5. Press the left or right arrow buttons on the remote control to select the identification number you
want to use for the projector. Then select Set and press Enter.
Repeat these steps for all the other projectors you want to operate from one remote control.
Note: If you don't know the projector's ID, hold down the ID button and press the Home button to
temporarily display the projector's ID on the screen.
Parent topic: Projector Identification System for Multiple Projector Control
Setting the Remote Control ID
The remote control's ID is set to 0 by default so it can operate any compatible projector. If you want to set
the remote control to operate only a particular projector, you need to set the remote control's ID to match
the projector's ID.
1. Turn on the projector you want the remote control to operate with exclusively.
2. Set the remote control ID switch to On.

Epson Pro G7000W Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	1.27 - 7.62 m
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Projection technology	3LCD
Supported aspect ratios	4:3, 16:10, 16:9
Screen size compatibility	- \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-45 - 45 °
Keystone correction, horizontal	-30 - 30 °
Lamp type	UHE
Lamp power	400 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
Noise level	37 dB
Noise reduction	Yes
Noise level (economic mode)	31 dB
Dot clock scanning frequency	162 MHz
Throw ratio	1.44 - 2.32:1
Optical zoom	1.6 x
Focal length range	24 - 38.2 mm
Aperture range (F-F)	1.7 - 2.3
Vertical lens shift range	-67 - 67 °
Full HD	No
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 1024 (SXGA)
Operating temperature (T-T)	0 - 45 °C
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	White
Cable lock slot type	Kensington
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	2
Audio (L/R) in	3
Composite video in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Remote control type	Wired
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	540 W
Power consumption (economy mode)	498 W
Built-in display	-

Weight and Dimensions

Depth	382 mm
Width	505 mm
Height	144 mm
Weight	12880 g