EasyManuals Logo

Epson Pro G7000W User Manual

Epson Pro G7000W
299 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #227 background imageLoading...
Page #227 background image
227
If you want to use a connected audio source when the projector is off, set the Standby Mode option to
Communication On and make sure the A/V Settings options are set correctly.
Make sure the Audio Settings option is set to the correct audio port for your video device.
If you connected an audio device to the projector's Audio Out port, the internal speaker is disabled.
However, you can still control the volume level via the remote control.
If you turn the projector on immediately after turning it off, the cooling fans may run at high speed
momentarily and cause an unexpected noise. This is normal.
Parent topic: Solving Image or Sound Problems
Related tasks
Connecting to External Speakers
Connecting to External Speakers
Solving Projector or Remote Control Operation Problems
Check the solutions in these sections if you have problems operating the projector or remote control.
Solutions to Projector Power or Shut-Off Problems
Solutions to Problems with the Remote Control
Solutions to Password Problems
Parent topic: Solving Problems
Solutions to Projector Power or Shut-Off Problems
If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:
Make sure the power cord is securely connected to the projector and to a working electrical outlet.
The projector's buttons may be locked for security. Unlock the buttons or use the remote control to
turn on the projector.
If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of
inactivity. Press the power button to wake the projector and adjust the Sleep Mode Timer setting to
change the sleep interval.
If the power button on the remote control does not turn on the projector, check its batteries and make
sure the Remote Receiver setting is turned on in the projector's menu, if available.
The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord
and contact Epson.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson Pro G7000W and is the answer not in the manual?

Epson Pro G7000W Specifications

General IconGeneral
Number of colors1.073 billion colors
Native aspect ratio16:10
Projection distance1.27 - 7.62 m
Vertical scan range50 - 85 Hz
Horizontal scan range15 - 92 kHz
Projection technology3LCD
Supported aspect ratios4:3, 16:10, 16:9
Screen size compatibility- \
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-45 - 45 °
Keystone correction, horizontal-30 - 30 °
Lamp typeUHE
Lamp power400 W
Lamps quantity1 lamp(s)
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
Noise level37 dB
Noise reductionYes
Noise level (economic mode)31 dB
Dot clock scanning frequency162 MHz
Throw ratio1.44 - 2.32:1
Optical zoom1.6 x
Focal length range24 - 38.2 mm
Aperture range (F-F)1.7 - 2.3
Vertical lens shift range-67 - 67 °
Full HDNo
Analog signal format systemNTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 1024 (SXGA)
Operating temperature (T-T)0 - 45 °C
PlacementDesktop, Ceiling
Product typeLarge venue projector
Product colorWhite
Cable lock slot typeKensington
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports2
Audio (L/R) in3
Composite video in0
Serial interface typeRS-232
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Remote control typeWired
Power sourceAC
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Power consumption (typical)540 W
Power consumption (economy mode)498 W
Built-in display-
Weight and Dimensions IconWeight and Dimensions
Depth382 mm
Width505 mm
Height144 mm
Weight12880 g

Related product manuals