Epson Pro G7000W User Manual

164
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be
saved correctly.
3. Press and hold the Menu button on the control panel or remote control as you connect the power
cord to the projector's power inlet.
4. When the power and Status lights turn blue and the Lamp and Temp lights turn orange, release the
Menu button.
The lights flash to indicate that settings are transferring to the projector. When the lights stop
flashing, the power light turns blue and the projector enters standby mode.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Once the projector enters standby mode, remove the flash drive.
Parent topic: Copying Menu Settings Between Projectors
Saving Settings to a Computer
You can save the projector settings you want to transfer to a computer.
Your computer must be running one of the following operating systems:
• Windows Vista
• Windows 7
• Windows 8.x
• Windows 10
• OS X 10.5.8

Epson Pro G7000W Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	1.27 - 7.62 m
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Projection technology	3LCD
Supported aspect ratios	4:3, 16:10, 16:9
Screen size compatibility	- \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-45 - 45 °
Keystone correction, horizontal	-30 - 30 °
Lamp type	UHE
Lamp power	400 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
Noise level	37 dB
Noise reduction	Yes
Noise level (economic mode)	31 dB
Dot clock scanning frequency	162 MHz
Throw ratio	1.44 - 2.32:1
Optical zoom	1.6 x
Focal length range	24 - 38.2 mm
Aperture range (F-F)	1.7 - 2.3
Vertical lens shift range	-67 - 67 °
Full HD	No
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 1024 (SXGA)
Operating temperature (T-T)	0 - 45 °C
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	White
Cable lock slot type	Kensington
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	2
Audio (L/R) in	3
Composite video in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Remote control type	Wired
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	540 W
Power consumption (economy mode)	498 W
Built-in display	-

Weight and Dimensions

Depth	382 mm
Width	505 mm
Height	144 mm
Weight	12880 g