Epson Pro G7000W User Manual

93
5. Select your screen's aspect ratio and press Enter.
6. Press the Menu button to exit.
7. Adjust the aspect ratio for the projected image, if necessary.
Parent topic: Using Basic Projector Features
Related concepts
Image Aspect Ratio
Adjusting the Image Position Using Lens Shift
If you cannot install the projector directly in front of the screen, you can adjust the position of the
projected image using the lens shift feature.
Note: Wait 20 minutes after turning on the projector before setting the focus, zoom, and lens shift for
maximum accuracy. Lens shift is not supported for the ELPLR04 lens.
1. Turn on the projector and display an image.
2. Press the Lens Shift button on the remote control or the Lens button on the control panel.
3. Press the arrow buttons to adjust the position of the projected image as necessary.
4. When you are finished, press the Esc button on the control panel or remote control.
Note: When adjusting the image height, position the image lower than where you want it to be and then
move it up. This will help prevent the image from moving down after adjustment. The image is clearest
when the lens is at the home position. To move the lens to the home position, press and hold the Lens
Shift button on the remote control or the Lens button on the control panel for at least three seconds.
Parent topic: Using Basic Projector Features
Adjusting the Image Position Using Screen Position
You can adjust the image position if there are margins between the edge of the image and the projected
screen frame.
Note: You cannot adjust the screen position if the Screen Type is set to 16:10 for a WXGA/WUXGA
projector model or 4:3 for a XGA projector model.
1. Turn on the projector and display an image.

Epson Pro G7000W Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	1.27 - 7.62 m
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Projection technology	3LCD
Supported aspect ratios	4:3, 16:10, 16:9
Screen size compatibility	- \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-45 - 45 °
Keystone correction, horizontal	-30 - 30 °
Lamp type	UHE
Lamp power	400 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
Noise level	37 dB
Noise reduction	Yes
Noise level (economic mode)	31 dB
Dot clock scanning frequency	162 MHz
Throw ratio	1.44 - 2.32:1
Optical zoom	1.6 x
Focal length range	24 - 38.2 mm
Aperture range (F-F)	1.7 - 2.3
Vertical lens shift range	-67 - 67 °
Full HD	No
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 1024 (SXGA)
Operating temperature (T-T)	0 - 45 °C
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	White
Cable lock slot type	Kensington
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	2
Audio (L/R) in	3
Composite video in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Remote control type	Wired
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	540 W
Power consumption (economy mode)	498 W
Built-in display	-

Weight and Dimensions

Depth	382 mm
Width	505 mm
Height	144 mm
Weight	12880 g