Epson Pro G7000W User Manual

73
4. Select the Others menu and press Enter.
5. If available, select the Priority Gateway setting for your network.
6. If your network environment uses an AMX controller, turn on the AMX Device Discovery setting to
allow the projector to be detected.
7. If your network environment uses a Crestron RoomView controller, turn on the Crestron RoomView
setting to allow the projector to be detected.
Note: Enabling Crestron RoomView disables the Epson Message Broadcast feature in the EasyMP
Monitor software.
8. If your network environment uses a Control4 or Control4 SDDP controller, turn on the Control4
SDDP setting to allow the projector to be detected.
9. If you want this projector to receive broadcasted messages over the network, turn on the Message
Broadcasting setting. Administrators can broadcast messages over the network using the Message
Broadcasting plug-in for EasyMP Monitor (Windows only).
10. When you finish selecting settings, select Complete and follow the on-screen instructions to save
your settings and exit the menus.
Parent topic: Using the Projector on a Network

Epson Pro G7000W Specifications

General

Number of colors	1.073 billion colors
Native aspect ratio	16:10
Projection distance	1.27 - 7.62 m
Vertical scan range	50 - 85 Hz
Horizontal scan range	15 - 92 kHz
Projection technology	3LCD
Supported aspect ratios	4:3, 16:10, 16:9
Screen size compatibility	- \
Projector native resolution	WXGA (1280x800)
Keystone correction, vertical	-45 - 45 °
Keystone correction, horizontal	-30 - 30 °
Lamp type	UHE
Lamp power	400 W
Lamps quantity	1 lamp(s)
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
Noise level	37 dB
Noise reduction	Yes
Noise level (economic mode)	31 dB
Dot clock scanning frequency	162 MHz
Throw ratio	1.44 - 2.32:1
Optical zoom	1.6 x
Focal length range	24 - 38.2 mm
Aperture range (F-F)	1.7 - 2.3
Vertical lens shift range	-67 - 67 °
Full HD	No
Analog signal format system	NTSC, NTSC 4.43, PAL, PAL M, PAL N, SECAM
Supported graphics resolutions	640 x 480 (VGA), 800 x 600 (SVGA), 1280 x 1024 (SXGA)
Operating temperature (T-T)	0 - 45 °C
Placement	Desktop, Ceiling
Product type	Large venue projector
Product color	White
Cable lock slot type	Kensington
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports	2
Audio (L/R) in	3
Composite video in	0
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Remote control type	Wired
Power source	AC
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.3 W
Power consumption (typical)	540 W
Power consumption (economy mode)	498 W
Built-in display	-

Weight and Dimensions

Depth	382 mm
Width	505 mm
Height	144 mm
Weight	12880 g