Epson RX690 Series User Manual

14 Copying
8. Press x Menu and change the settings
(& “Print settings for Reprint/Restore
Photos” on page 45). Then press OK.
9. Press x Start.
Copying Documents
Tip:
By using the Auto Duplexer you can copy and
print on both sides of your paper. For details on
setting it up, see your online User's Guide.
1. Press r Copy.
2. Select the copy settings.
3. Press x Menu to change the settings
(& “Print settings for Copy mode” on
page 41). Then press OK.
Tip:
When CD/DVD Copy is selected as the
Layout, try printing a test sample on paper
first. Select Plain Paper as the Paper Type
setting and load plain paper.
4. Press x Start.
Note:
❏ If you select 2-up Copy, Book/2-up, or
Double Side 2-up as the Layout setting ,
scan one original at a time.
❏ If the edges of the copy are cropped off, move
the original away from the corner slightly.
Copying books
When you select Book/2-up or
Book/Double Side as the Layout setting,
place the original on the document table as
shown in the following illustration.
Open the book to the first page you want to
copy and then place it on the document
table.
When you have finished scanning the first
page, turn the book around, and then place
it on the document table.
Select Color for color copies or B&W
for black-and-white copies.
Select the type of document.
Select a layout option (& “Copy
Mode” on page 40).
Note:
When copying onto both sides of the
paper using the optional Auto Duplexer,
select Double Side 1-up, Book/Double
Side or Double Side 2-up as the layout.
Set the number of copies.

Epson RX690 Series Specifications

General

Brand	Epson
Model	RX690 Series
Category	All in One Printer
Language	English