26 Printing from an External Device
Printing from an External Device
You can print your photos from an external
device, such as a digital camera, mobile
phone, or USB storage device, with a USB
cable directly.
Tip:
For details on printing with the optional
BLUETOOTH Photo Print Adapter, see your
online User's Guide.
From a Storage Device
Note:
❏ Not all USB devices are supported. For
details, contact your regional customer
support.
❏ You may not be able to print photos in the
storage device that were saved by using a
product other than this printer.
1. Connect your device to the printer
(& “Using an External Storage Device”
on page 27).
2. Remove any memory cards from the
printer.
3. When you see this screen, select which
folder to print from, then press OK.
4. Follow the same steps as you would to
print from the memory card
(& “Printing Photos” on page 17).
Using PictBridge or USB
DIRECT-PRINT
PictBridge and USB DIRECT-PRINT let you
print your photos by connecting your
digital camera directly to the printer.
Make sure your camera and photos meet the
following requirements.
1. Make sure your printer is not printing
from a computer.
2. Remove any memory cards from the
printer.
3. Press F [Setup].
4. Select PictBridge Setup, then press OK.
5. Select the print settings (& “Print
settings for Memory Card mode” on
page 42). Then press OK.
6. Connect the USB cable from your camera
to the USB port on the front of the
printer.
7. Make sure your camera is turned on and
use it to select the photos, adjust any
necessary settings, and print your
photos. See your camera’s manual for
details.
Note:
❏ Depending on the settings on this printer
and the digital camera, some
combinations of paper type, size, and
layout may not be supported.
❏ Some of the settings on your digital
camera may not be reflected in the output.
Compatibility PictBridge or USB
DIRECT-PRINT
File format JPEG
Image size 80 × 80 pixels to 9200 × 9200
pixels
USB port
To Next Page
Loading...
Need help?
General
