Epson RX690 Series User Manual

Printing from a Memory Card 21
English
4. On the LCD screen, make sure Print
Photos from Index Sheet is selected,
then press OK.
5. Press x Start.
Note:
If you have more than one index sheet, wait
each time until printing is complete. Then
repeat the steps above to scan and print
from each additional sheet.
Printing onto a CD/DVD
Making settings and printing
1. Press v Specialty Print.
2. Select Print on CD/DVD, then press OK.
3. Select the layout, then press OK
(& “Print settings for Print on
CD/DVD” on page 48).
Note:
When selecting photos for the CD/DVD
4-up or CD/DVD Variety layout setting, you
do not have to select the maximum number
of photos. Unused areas of the layout will be
left blank.
4. Press OK.
5. Select a photo and set the number of
copies.
6. Press x Menu and change the settings
(& “Print settings for Print on
CD/DVD” on page 48). Then press OK.
Tip:
If you want to print a test sample on paper
first, select Plain Paper as the Paper Type.
7. Press x Start.
Adjusting the print area
Adjusting the diameter
1. Press v Specialty Print.
2. Select Print on CD/DVD, then press OK.
3. Select the layout, then press OK.
4. Press OK.
5. Press x Menu.
6. Select CD Inner-Outer, then press r.
7. Set the inside diameter (Inner) and the
outside diameter (Outer), at intervals of
1 mm, and then press OK.
Note:
If you are printing in the following areas of
the disc, the disc or CD/DVD tray may get
stained with ink.
8. Press OK, then try printing again.
Adjusting the print position
1. Press F [Setup].
2. Select the CD/Sticker Position, and
press OK.
3. Select CD/DVD, then press r.
Inner 18 to 46 mm
Outer 114 to 120 mm
Inner hub area 18 to 42 mm
Outer periphery
area
117 to 120 mm

Epson RX690 Series Specifications

General

Brand	Epson
Model	RX690 Series
Category	All in One Printer
Language	English