8 Handling Paper
Into the front paper cassette
Note:
❏ Do not load Photo Stickers into the front paper
cassette.
❏ Do not load paper into the front paper
cassette that has already been printed onto
one side or that has been fed through the
printer once.
1. Pull out the front paper cassette.
2. Lift off the cover.
3. Pinch the knob and slide the paper
guides to accommodate the paper size
you are loading.
4. Load paper with the printable side face
down. Make sure the paper is under the
c arrow mark inside the paper guide.
Note:
❏ Do not load paper above the c arrow mark
inside the paper guide.
❏ Align the edges of the paper before
loading.
5. Fit the edges of the paper snugly against
the paper guides. The paper will not be
loaded correctly if it overflows or does
not fit properly.
6. Replace the cover.
7. Insert the cassette back into the printer
and keep it flat as you insert it.
Follow the same steps to load 10 × 15 cm
(4 × 6 in.) and 13 × 18 cm (5 × 7 in.)
paper.
To Next Page
Loading...
Need help?
General
