When to perform Component to be cleaned
The printing surface and so on is soiled
even when cleaning the caps
D Clean around print head
U User's Guide (Online Manual)
You can check the procedure in a video on YouTube.
Epson Video Manuals
When printing is not performed normally
even after head cleaning
E Clean edges of the metal
U User's Guide (Online Manual)
* If this message is displayed frequently, contact your dealer or Epson support.
Locations of Consumables and Replacement Timing
When to perform Component to be replaced
When a message indicating that an item
needs to be prepared or replaced is
displayed
A Wiper unit
B Anti-drying caps
C Flushing pad
U “Replacing the Head Cleaning Set” on page 46
You can check the procedure in a video on YouTube.
Epson Video Manuals
F Waste ink bottle
U “Disposing of Waste Ink” on page 44
SC-F2100 Series Operator's Guide
Maintenance
28
To Next Page
Loading...
