c
Important:
❏ Do not pull the scale with excessive force. If
it is pulled with too much force, the right
section may detach.
❏ Make sure that ink cleaner does not drip
into the printer. If any cleaner does drip,
wipe it with a dry cleaning cloth.
❏ Do not use anything except for the
cleaning cloth supplied with the air filter.
❏ Do not rub the scale too hard. If it is
damaged, the printer may not operate
correctly.
E
Use a dry cleaning cloth to wipe away any ink
cleaner or dust stuck to the scale.
F
Grip the tab on the air filter and remove it.
G
Put the old air filter into the bag of the new air
filter.
H
Attach the new air filter.
Insert the two teeth at the end of the filter into the
holes in the printer, and then press down until
you hear the tab click into place.
I
Close the printer cover.
SC-F2100 Series Operator's Guide
Maintenance
37
To Next Page
Loading...
Need help?
General