❏ If any screw spins freely, the Print Head is not
correctly installed. Remove it and then
re-install it.
D
Hold the Ink Damper Unit in both hands, and
install it on the Print Head.
c
Important:
Do not touch the bottom of the Ink Damper
Unit. There is a risk of deforming the ink
supply ports.
E
Lightly press on the handles of the Ink Damper
Unit to assure it is installed.
F
Turn all the fixing levers (4 locations) back
lengthwise to lock them.
c
Important:
Be sure to lock all the fixing levers.
If they are not locked, ink could leak when the
printer is used.
SC-F3000 Series How to Replace the Print Head
Replacement Procedure
20
To Next Page
Loading...
