Overview of Work
1. Start the printer in User Self Repair Mode
U “How to Start in User Self Repair Mode” on page 9
If the print results are not correct, do a Diagnosis, and take measures according to the diagnosis results.
The Print Head may not need to be replaced if you just change the settings or do Cleaning(Heavy).
U “How to Do Diagnosis” on page 11
2. Replacing a Print Head
U “Replacement Procedure” on page 13
3. Adjusting a Print Head
U “Adjustment Work” on page 23
SC-F3000 Series How to Replace the Print Head
Work Flow
8
To Next Page
Loading...
