Epson SC-F3000 Series Manual

How to Install
You can check the procedure in a video on YouTube.
Epson Video Manuals
Hold the Print Head correctly.
U “Correctly Holding the Print Head” on page 14
c
Important:
Do not touch the areas you should not touch while
handling the replacement Print Head.
U “Do Not Touch These Areas” on page 14
A
Use both hands to take the replacement Print
Head out of the protective case and install it in the
printer.
Install it so the label can be seen towards the
front.
c
Important:
❏ Immediately install the Print Head to the
printer after removing it from the case.
There is a risk of lint or dust getting on it.
❏ Placing the nozzle side on a surface can
cause malfunctions.
B
Connect the left and right connectors.
Lightly press on the top of the connectors to
assure they are inserted.
C
Use your fingers to turn the fixing screws (4 pc)
clockwise to secure the connector.
❏ Use your fingers to tighten each of the screws in
the order shown in the following illustration
until they stop turning.
SC-F3000 Series How to Replace the Print Head
Replacement Procedure
19

Epson SC-F3000 Series Specifications

General

Brand	Epson
Model	SC-F3000 Series
Category	Printer
Language	English