Epson SC-F3000 Series Manual

S
Remove the left side connector in the same way,
and place it on the holder.
T
Open the protective case of the replacement Print
Head, and place it so the inside of the lid is facing
upwards.
Later, you will place the used Print Head that you
removed on the upside down lid.
U
Use both hands to lift the used Print Head
straight up and remove it.
Hold the Print Head correctly.
U “Correctly Holding the Print Head” on
page 14
V
Place the used Print Head that you removed on
the lid of the protective case.
SC-F3000 Series How to Replace the Print Head
Replacement Procedure
18

Epson SC-F3000 Series Specifications

General

Brand	Epson
Model	SC-F3000 Series
Category	Printer
Language	English