Item Parameter
Media Back Feed after Curing Half Way, Complete, Off
Heater Warm Up Additional Time 0 to 10 minutes
Print Head Warm Up On, Off
Platen Gap 1.7, 2.0, 2.5
Feeding Tension Lv1 to Lv4
Paper Suction Lv0 to Lv10
Media Feed Speed Limitation On, Off
Pressure Roller Load Weak, Medium, Strong
Skew Reduction On, Off
Roll Winding Direction Printable Side Out, Printable Side In
Stick Prevention On, Off
Skip Wrinkled Media 500 mm, Off
Periodic Cleaning 30 to 180 minutes
Print Quality Adjustment Temperature 40 to 110 °C (104 to 230 °F)
Remaining Amount Management
Remaining Amount Management On, Off
Remaining Amount 1.0 to 999.9 m (3.3 to 3280.5 feet)
Remaining Alert 1.0 to 15.0 m (3.3 to 49.2 feet)
Maintenance
For more information on these items, see U “Maintenance menu” on page 118
Item Parameter
Print Head Nozzle Check
Print Position Right, Center, Left
Nozzle Check Pattern Standard, Quality Check
Print Head Cleaning
Cleaning(Light) All Nozzles
Cleaning(Medium) Select Nozzles, All Nozzles
Cleaning(Heavy)
Cleaning the Maintenance Parts Anti-Drying Caps, Around the Head, Suction Cap, Flushing Pad,
Media Cleaner
Replace Waste Ink Bottle
SC-R5000 Series/SC-R5000L Series User's Guide
Control Panel Menu
104
To Next Page
Loading...
Need help?
General
