Item Parameter Explanation
Margins
Side Margin(Right)
3 to 25 mm (5
*
)
(0.12 to 0.98 inches
[0.20*])
Choose the width of the right margin when media is loaded in the
printer. See the following for more information.
U “Printable area” on page 70
Side Margin(Left)
3 to 25 mm (5
*
)
(0.12 to 0.98 inches
[0.20*])
Choose the width of the left margin when media is loaded in the
printer. See the following for more information.
U “Printable area” on page 70
Margin Between Pa-
ges
0 to 999 mm (10
*
)
(0.00 to 39.33
inches [0.39*])
Sets the margin between printed pages. For single-page print jobs, this
is the margin placed between jobs.
Width Adjustment
-10 to +10 mm (0
*
)
(-0.394 to 0.394
inches [0.00*])
You can adjust a margin between pages. Even after making
adjustments, the size of the margin may change, depending on the
media and usage environment.
The margin increases when the number is moved in the + direction, and
decreases when the number is moved in the - direction.
U “Printable area” on page 70
Print Start Position
0 to 1000 mm (0
*
)
(0.00 to 39.37
inches [0.00*])
Adjust this parameter if you want to print from the near center of the
media or if you want to shift the printed area left from the Side Margin
(Right) setting. The area from the right edge of the media, is left blank
using the width set in Print Start Position If a value is selected for Side
(Right), an additional area corresponding to the width selected for Side
(Right) will be left blank. See the following for more information.
U “Printable area” on page 70
SC-R5000 Series/SC-R5000L Series User's Guide
Control Panel Menu
109
To Next Page
Loading...
Need help?
General
