Epson SC-T3100M Series User Manual

Settings item Settings value Explanation
Oversize The position at which the margin is added depends on the base
output size setting, as shown below.
❏ When set to Auto
Adds the value selected for page margin (area of
in the
following illustration) outside the hard clip area of the PS
command of the data (area of
in the following illustration).
❏ When set to a standard size or user defined size
Adds the value selected for page margin (area of
in the
following illustration) outside the size selected for base output
size (area of
in the following illustration). With the actual
output size, the margin section becomes larger than the
selected size (the area of
in the following illustration).
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Using the Menu
144

Epson SC-T3100M Series Specifications

General

Brand	Epson
Model	SC-T3100M Series
Category	Printer
Language	English