Epson SC-T3100M Series User Manual

Settings item Settings value Explanation
Resolution
Standard
*
This setting is enabled when the resolution is not specified in the
sent print data. Standard prints at the resolution corresponding to
the Paper Type setting for the paper selected in Paper Source and
the Quality setting.
300dpi
600dpi
1200dpi
Color Mode (Com-
mon)
EPSON Standard (sRGB) Optimize the sRGB space and correct the color.
Business Graphics
*
Perform color correction to sharpen your images based on the
sRGB space.
GIS Perform color correction suitable for when printing GIS
(Geographic Information System) topographical maps or similar.
Line Drawing Perform color correction suitable for CAD drawings and other line
drawings.
Off (No Color
Management)
Do not perform color correction.
HP-GL/2 Unique Settings
(Print settings unique to HP-GL/2 or HP RTL modes.)
Rotate
0˚
*
You can rotate the coordinates of the drawn data counterclockwise
in units of 90˚ before printing. Note that objects drawn by RTL are
not rotated. When both this setting and the RO command specify
rotation, rotation is performed using the combined amount of
both values. Note that rotation by the RO command is for objects
only (the arrow section in the following illustration), and rotation is
not performed for the drawn area (the square section in the
following illustration). As a result, objects in a section that protrude
from the drawn area are not printed.
90˚
180˚
270˚
Origin Setup
Left Edge
*
Set the data coordinate origin.
Center
SC-T3100M Series/SC-T5100 Series/SC-T3100 Series/SC-T5100N Series/SC-T3100N Series/SC-T2100 Series User's Guide
Using the Menu
146

Epson SC-T3100M Series Specifications

General

Brand	Epson
Model	SC-T3100M Series
Category	Printer
Language	English