Epson SC-T5200D Series User Manual

HP-GL/2 Settings
Item Description
Quality Speed Choose Print Quality in view of image quality and print speed.
Fine
*
Output Size
Auto
*
The hard clip area of the PS command of the data becomes the base
output size. The actual output size depends on the Margin Options
setting.
When the data does not contain a PS command, the smallest rectangle
area
of in the following illustration including the print object becomes
the base output size.
A Series/US-ANSI/
US-ARCH/B Series/
Photo Series/
Others
Choose the base output size from the compatible standard sizes. The
actual output size depends on the Margin Options setting.
For a cut sheet, this setting is available only when the data does not
contain a PS command.
If the data contains a command, this setting is not available, and the hard
clip area of the PS command becomes the base output size.
User Defined Select this option when outputting at non-standard sizes. After selecting
this setting, set Paper Width and Paper Height. You can set in 0.1 mm
increments.
Paper Width
SC-T7200 Series/SC-T7200D Series: 89
*1
to 1,118 mm
SC-T5200 Series/SC-T5200D Series: 89
*1
to 914 mm
SC-T3200 Series: 89
*1
to 610 mm
Paper Height
127 to 4,620 mm
The actual output size depends on the Margin Options setting.
*1. The smallest size supported by the printer is 254 mm wide × 127 mm
long. If a smaller size is entered for this setting, the document will print
with wider-than-expected margins, which must be trimmed.
SC-T7200 Series/SC-T5200 Series/SC-T3200 Series/SC-T7200D Series/SC-T5200D Series User's Guide
Using the Control Panel Menu
150

Epson SC-T5200D Series Specifications

General

Brand	Epson
Model	SC-T5200D Series
Category	All in One Printer
Language	English