Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
DISASSEMBLY/ASSEMBLY Disassembly Procedures 153
Confidential
4.2.5.9 CDR Tray Assy
Parts/Components need to be removed in advance:
ADF Unit (Artisan 810/835/837/PX810FW/TX810FW/PX820FWD/TX820FWD/
PX830FWD only)/Scanner Unit/Upper Left Housing/Paper Guide Top Assy/
Upper Housing/Rear Left Housing/Left Housing/Decoration Belt/Power Supply
Unit/Rear ASF Paper Guide Cover/Lower ASF Paper Guide Assy
Removal procedure
1. Release the hook (x1) of the Spur Gear B on the Spur Gear A side, and
remove the Spur Gear A. (See
Fig. 4-99.)
2. Align the grooves on the CDR Tray Assy with the teeth of the Spur Gear B,
and remove the Spur Gear B.
Figure 4-99. Removing the CDR Tray Assy (1)
as
Need to retighten screw for ASF Paper Guide when
disassembling and reassembling the Lower ASF Paper guide
assy. Tighten a screw while pushing ASF Paper Guide Assy
toward the front side of printer when tighten screw for ASF
Paper Guide. (See
Fig. 4-98.)
Figure 4-98. Retightening screw for ASF Paper Guide
Make sure no scratches on paper by paper feed test with Ultra
Glossy Photo paper after reassemble Lower ASF Paper Guide
Assy.
A D J U S T M E N T
R E Q U I R E D
When replacing the Lower ASF Paper Guide Assy, make sure to
carry out specified lubrication. (See
Chapter 6 "MAINTENANCE")
To Next Page
Loading...
