Epson Stylus Artisan 730 - Removing the Circuit Board; Panel Unit

Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD Revision G
DISASSEMBLY/ASSEMBLY Disassembly/reassembly procedures specific to Artisan 710/PX710W/TX710W 188
Confidential
184
4.3.2 Removing the Circuit Board
4.3.2.1 Panel Unit
 Parts/Components need to be removed in advance:
Scanner Unit/Upper Left Housing/Paper Guide Top Assy/Upper Housing
 Removal procedure
1. Open the Panel Unit. (See Fig. 4-178.)
2. Lift the Right Hinge and detach the Panel FFC Guide from the Upper
Housing.
Figure 4-178. Removing the Panel Unit (1)
 Align and insert the dowel of the Base Frame to the positioning
hole of the Right Housing. (See
Fig. 4-174.)
 Attach the Card Cover after installing the Right Housing to the
printer.
 When attaching the Card Cover, insert the ribs (x2) of the Card
Cover to the inside of the Right Housing, and secure it with the
hooks (x2).
Figure 4-177. Attaching the Card Cover
Hook
Rib
Right Housing
Card Cover
C H E C K
P O I N T
The disassembly/reassembly procedures for Artisan 810/835/837/
725/730/PX810FW/TX810FW/PX820FWD/TX820FWD/
PX830FWD/PX720WD/TX720WD/PX730WD/TX730WD differ
from those for Artisan 710/PX710W/TX710W. See below for the
procedures.
 Artisan 710/PX710W/TX710W: 4.2.4.1 Panel Unit (p.124)
 Artisan 725/PX720WD/TX720WD: 8.3.2.3 Panel Unit (p.268)
 Artisan 837/PX830FWD: 9.4.2.10 Panel Unit (p.302)
 Artisan 730/PX730WD/TX730WD: 9.4.2.18 Panel Unit (p.311)
Panel Unit
Right Hinge
Panel FFC Guide