Epson Artisan 810/835/837/710/725/730/Epson Stylus Photo PX810FW/TX810FW/PX820FWD/TX820FWD/PX830FWD/PX710W/TX710W/PX720WD/TX720WD/PX730WD/TX730WD
Revision G
MAINTENANCE Overview 246
Confidential
Figure 6-7. Lubrication of the EJ Release Frame Assy L
Figure 6-8. Lubrication of the Spur Gear 15.2 and Spur Gear 26.4
Figure 6-9. Lubrication of the Lower ASF Paper Guide Assy
<Lubrication Points>
Contact point between the EJ
Release Frame Assy
L and the EJ
Release Slider Frame
<Type>
G-71
<Application Amount>
Sufficient quantity
<Application Timing>
Before installing the EJ Release
Frame Assy L
<Remarks>
Apply with brush
<Lubrication Points>
1. On the shaft of Spur Gear 15.2
2. On the toothed area of Spur
Gear 26.4
<Type>
G-71
<Application Amount>
1. φ 1 x 1 circle
2. φ 1 x half circle
<Application Timing>
Before installing the CDR Tray
<Remarks>
Apply with injector
EJ Release Frame Assy L
EJ Release Slider Frame
Application Point
Spur Gear 15.2
Application Point
CDR Tray
Spur Gear 26.4
Application Point
<Lubrication Points>
1.
Ten contact points between the
Intermediate Roller shaft and the
Lower ASF Paper Guide Assy
2. On the shaft of Spur Gear 26
<Type>
G-71
<Application Amount>
1. φ 1 x 1 circle
2. φ 1 x 1 circle
<Application Timing>
Before installing the Lower ASF
Paper Guide Assy
<Remarks>
Apply with injector
Intermediate Roller shaft
Lower ASF Paper Guide Assy
Application Point
Lower ASF Paper Guide Assy
Spur Gear 26
Application Point
To Next Page
Loading...
