Epson Stylus CX8400 Series
6 7/07
8. Select
With Border to leave a small margin around the
image or select
Borderless to expand the image all the way
to the edge of the paper (slight cropping may occur).
Note:
Layout must be set to With Border to select Plain Paper.
9. To change any of the copy
mode print settings displayed
on the screen, press
Menu.
❏ To adjust the copy size,
select
Zoom and choose
either
Actual (to select a
percentage using + or
–) or
Auto Fit Page (to
automatically size the image
to fit your paper).
❏ To change the paper type, select
Paper Type and
choose the type of paper you loaded.
❏ To change the paper size, select
Paper Size and choose
the size of paper you loaded.
Note:
Paper Size options depend on the Paper Type setting you
choose.
❏ To change the copy quality, select Quality and choose
Standard, Best, or Draft.
Note:
Standard is the default setting for Quality if you choose
photo paper.
❏ To adjust the darkness or lightness of the copy, select
Density and choose a higher (darker) or lower (lighter)
setting.
❏ To adjust the amount of image expansion when
printing borderless photos, select
Expansion and
choose
Standard, Mid, or Min.
Note:
You may see white borders on your printed photo if you use
the Min setting.
10. After you finish selecting your settings, press OK.
11. Press x
Start to begin copying.
To cancel copying, press y
Stop/Clear Settings.
Restoring Photos
You can also restore the colors in faded photos, print with or
without borders, convert color photos to black-and-white, and
crop photos.
1. Press the P
On button to turn on the CX8400 Series.
2. Load 4 × 6-inch, 5 × 7-inch, 8 × 10-inch, or letter-size
Epson special paper in the sheet feeder (see page 4).
3. Place your original photo on the document table.
Note:
You can copy up to 2 photos at the same time. Place them
0.2 inches (5 mm) apart.
4. Press the Restore button.
5. Press
OK.
6. To turn on
Color Restoration
to restore colors in faded photos
as you copy, press r and select
On. (If your photo is not faded,
do not turn on
Color Restoration.)
7. Press
OK.
8. Press
OK to prescan your photo.
You see these settings over a
preview of your photo:
9. To print more than 1 copy,
press + or – to select the
number.
10. If you want to crop your photos
and enlarge the resulting image
area to fit onto your paper, press
Display/Crop.
❏ To resize the image area,
press + or –.
❏ To move the image area, use
the arrow buttons.
❏ To check the zoomed image, press
OK.
11. After you finish cropping your photos, press
OK.
12. To change any of the restore mode print settings displayed
on the screen, press
Menu.
Paper type
Paper Type
setting
Plain paper Plain Paper
Epson Bright White Paper
Epson Presentation Paper Matte
Epson Premium Presentation Paper Matte Matte
Epson Premium Photo Paper Glossy Prem. Glossy
Epson Premium Photo Paper Semi-gloss
Epson Ultra Premium Photo Paper Glossy Ultra Glossy
Epson Photo Paper Glossy Photo Paper
To Next Page
Loading...
Need help?
General
