Inserting the Card 15
Your Epson printer supports image files that meet the following requirements:
* DCF is the “Design rule for Camera File system” standard
Inserting the Card
1. Make sure your Epson printer is turned on.
2. Insert your card into the correct slot as shown:
The memory card access light flashes, then stays lit. Now you can:
■ View your photos on the LCD screen and print them (page 16)
■ Print an index sheet so you can select which photos to print (see page 18)
Media format DCF version 1.0 or 2.0 compliant*
File format JPEG
Supports Exif version 2.21
Image size 80 × 80 pixels to 9200 × 9200 pixels
Number of files Up to 999
Memory card
access light
Insert just one card at a time (it won’t go in all the way)
Left slot
Right slot
To Next Page
Loading...
Need help?
General
