Epson Stylus Office T1110 - 4.4.14 Front Paper Guide; Paper EJ Roller; Front Paper Guide Pad Tray

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100 Revision A
Disassembly And Assembly Disassembling the Printer Mechanism 109
Confidential
10. Remove the C.B.S. M3 x 6 screw and the C.B.S.(P2) M3x10 screw that secure the
Right Support Frame and the Joint Tube, and remove the Right Support Frame and
the Joint Tube from the Main Frame.
Figure 4-114. Removing the Right Support Frame
11. Remove the Ink System Unit downwards from the Main Frame.
Figure 4-117. Removing the Ink System Unit
 Align the positioning holes on the Right Support Frame with
the guide pins on the Main Frame.
Figure 4-115. Installing the Right Support Frame
2
Upper
surface
2) C.B.S. M3x6
(8±1 kgf.cm)
1
Joint Tube
Right Support
Frame
3) C.B.S. (P2) M3x10
(8±1 kgf.cm)
Positioning holes and
Guide pins
 Align the positioning hole of the Printer Mechanism with the
guide pin of the Joint Tube.
Figure 4-116. Reinstalling the Joint Tube
 Tighten the screws in the order shown in Figure 4-114
Positioning hole
and Guide pin
Joint Tube
Ink System Unit
www.printerwhy.net
高速行式打印机 http://www.lineprinter.com.cn/
_______________________________________________________________________________________
_______________________________________________________________________________________
打印机维修论坛 http://www.printerwhy.net/ 打印机驱动下载 http://www.printerwhy.com/