24 Loading Paper
7. Insert the left roll paper holder (marked with an orange triangle) into the far left
slot (also marked with an orange triangle). Then insert the other holder into the
corresponding slot on the right.
8. Load the paper part of the way into the roll paper feeder (under the white rollers),
then slide the right roll paper edge guide to fit lightly against the paper.
9. Push the paper into the feeder as far as it will go; the printer feeds the paper
automatically.
Caution: Don’t load
roll paper into the
sheet feeder or the
slot behind the paper
support; make sure it
is below the white
rollers.
To Next Page
Loading...
